Chair
Chair
Chair
Chair
Chair
3
2
3
2
A
A
B
C
B
C
Position one of
Front Legs (2)
at the corresponding wooden corner as shown.
Insert 2 pieces of
Bolts (A)
with 2 pieces of
Plastic Washers (B)
into the pre-drilled holes on the apron
of
Chair Body (1)
through the pre-drilled holes on
Front Legs (2)
.
Repeat the same steps for the remaining
Front Leg (2)
and
Back Legs (3)
.
Use
Allen Wrench (C)
to tighten all the
Bolts (A)
clockwise as shown, but do not fully tighten
Bolts (A)
for either leg at this step.
