1. Table Top
2. Leg Frame
x2
Hardware:
Component:
Page 1 of 5
Thank you for purchasing the
MODWAY TABLE!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the lounger, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
Customer Service 609-256-9000 www.modway.com
1
x1
EEI-3700-NAT
TABLE
A
C
E
Bolt M6x80mm
x 4
Bolt M6x40mm
x 2
Allen Wrench M4
x 2
B
Nut M6
x 6
Screw M6x60mm
x 8
D
3. Brace Rail 1
x2
4. Brace Rail 2
x1
2
3
4
