EEI-3855/3856/3857 BAR STOOL
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2
STEP 1:
1. Please put
Stool Body (1)
upside down on a carpeted or padded surface.
2. Attach
Stool Body (1)
to
Frame (2)
by using 4 pieces of
Bolts (A)
with 4 pieces of
Spring Washers (B)
and 4 pieces of
Flat Washers (C)
. Tighten all
Bolts (A)
by using
Allen Wrench (D)
clockwise
as shown in
Figure 1
.
3. Insert 2 pieces of
Screws (E)
into the holes in the
Frame (2)
, Tighten
Screws (E)
by using
Screw driver (F)
clockwise fully as shown in
Figure 2
. Then fully tighten all
Bolts (A)
by using
Allen Wrench (D).
STEP 2:
Carefully turn over the assembled Bar Stool.
Assembly is complete. Your Bar Stool is ready to enjoy now!
