EEI-3939/ EEI-3940/ EEI-3941
Customer Service 609-256-9000
︱
www.modway.com
Page 3 of 4
STEP 3:
1. Carefully put
Top (5)
on the assembled Base from the Step 1 by two adults as shown. Set
Top (5)
on the
Base's at the back and leave about 5mm distance from the edge for all other three sides.
2. Make sure the
Top (5)
fits closely and pour Sealant
(Not provided)
for the sealing as shown.
STEP 4:
1. Put 6 pieces of
Rubber Suckers (C)
on the pre-installed Clips
of the
Metal Frame Sides (1)
as shown.
2.
Put 1 piece of
Glass (6)
on the
Rubber Suckers (C)
with your hand as shown.
