STEP 17:
Customer Service 609-256-9000 / www.modway.com
Page 11 of 11
IMPORTANT:
THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
* place heaviest items in the lowest
compartment.
accomodate, do not set TVs or other
heavy objects on the top of this
product.
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
reduce, but not eliminate the risk
To make driving the screw easier, you can drill a 1/8” diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
N
x 1
17.
17.
EEI-4310-WHI-CAP
EEI-4310-CAP-WHI
DISPLAY CABINET
