modway MOD-5534, Manual

Customer Service 908-368-1025

︱

www.modwayfurniture.com                                                                             

Page 4 of 6 

A or Bx4

Cx8

Fx1

Ex4

Dx4

STEP 1:

Line up the 

Bed Frame (2) 

board’s pre-dr

illed holes to match those of the 

Headboard (1) 

. 

Secure the 

Headboard (1) 

to the 

Bed Frame (2) 

by using 2 pieces of 

Bolt (B) 

for the thicker 

Bed Frame (2

), and 2 pieces 

of 

Bolt (A) 

for the thinner 

Bed Frame (2).

Before inserting each bolt, place 1 piece of 

Spring Washer (D) 

and 

Arc

Washer (C) 

on each bolt. Then fit 1 piece of 

 Arc

Washer (C) 

on the bolt as it protrudes through the other side of the 

Bed Frame (2).

Place 1 piece of 

Hex Nut (E) 

after the 

 Arc Washer (C) 

at the end of each bolt. Then tighten the 

Bolts (A or B) 

by  

using the 

Allen Wrench (F).

Repeat the same procedure for each bolt and each side of the 

Bed Frame (2).

Hardware & Tool required

STEP 2:

2

Assembly is completed. The bed is ready to use now! 

NOTE: 

Hardware may loosen over time. Periodically check that all connections are tight.

Carefully position the assembled bed to the desired location by four adults.

1

Note: 

Extra hardware were provided for attaching the headboard to your Bed Frame (use is optional).

1

2

F

E

AorB

C

D

MODWAY  

CONNECTING HEADBOARD TO BED FRAME

D

C

AorB

2.

1.