Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 6 of 6
A or Bx4
Cx4
Dx4
Fx1
Hardware & Tool required
STEP 2:
2
Assembly is completed. The bed is ready to use now!
NOTE:
Hardware may loosen over time. Periodically check that all connections are tight.
1
1
2
A
D
C
F
Line up the
Bed Fame (2)
board’s pre-drilled holes to match those of the
Headboard (1).
Secure the
Headboard (1)
to the
Bed Frame (2)
by using 2 pieces of
Bolt (B)
with 2 pieces of
Spring Washer (D)
, 2 pieces
of
Washer (C)
for the thicker
Bed Frame (2)
, and 2 pieces of
Bolt (A)
with 2 pieces of
Spring Washer (D)
, 2 pieces of
Washer (C)
for the thinner
Bed Frame (2).
Then tighten the
Bolts (A or B)
by using the
Allen Wrench (F).
Repeat the same procedure for each bolt and each side of the
Bed Frame (2).
STEP 1:
MODWAY
CONNECTING HEADBOARD TO BED FRAME
Carefully position the assembled bed to the desired location by four adults
.
