Customer Service 908-368-1025 www.modway.com
Page 3/3
Fx6
Hardware & Tool required
Hardware & Tool required
STEP 4:
Attach Slat (7) into bed by inserting CSK screw (F) into the predrilled holes on the Slat (7) . Tighten with Screwdriver (Not provided) .
STEP 3:
1. Attach the Support leg(5) as shown in diagram. Place the JCBC bolt 50MM(D)) and tighten by using M4 Allen Key(G) After, place Adjuster (I) to
bottom support leg(5) as diagram shown.
Screwdriver (Not provided) .
Cx3
Gx1
Ix3
MOD-6054, MOD-6055, MOD-6056
