background image

Component

:

01 of 03

Customer Service 609-256-9000 www.modway.com

HEADBOARD

SUPPORT WOOD

 BED FRAME

(DOES NOT INCLUDE
WITH THE PURCHASE)

1 PC

2 PCS

A

B

C

-

Thank you for purchasing the 

MODWAY BED!

Before you start, here are some helpful advice:

1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.

2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 20 minutes.

3. Please do not use any tools other than those provided or recommended in these instructions.

4. Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save tools that have been provided.

6. Please keep all fitting out of reach of children.

MOD - 6356

MOD-6707

Summary of Contents for MOD-6707









Reviews: