M – Anti Tipping Kits x1
TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE
Different wall materials require unique wall fasteners.
Please consult your local hardware store to ensure you are using the correct hardware for your wall type
Installation Instructions:
This tip restraint must be attached to a wall stud using the (C) 2” screw enclosed.
1. Attach a bracket (A) securely to the back top rail of the furniture using the 5/8” screw (D) provided,
through the smaller hole.
2. Locate the other bracket (A) on the wall over a wall stud and 2 inches below the mounting bracket
secured to the back of your unit. Attach to the wall stud using the (C) 2” screw provided, through the
smaller hole.
3. Place the furniture into position so both mounting brackets are vertically in line.
4. Lace the end of the restraint strap (B) through the larger hole in each mounting bracket. Bring both ends
together and slide the flat end through the locking end and draw it through until all slack is removed.
5. Confirm that the strap (B) is securely laced and locked.
Customer Service 908-368-1025 | www.modway.com
C-2” Screw x 1
D-5/8” Screw x 1
A-Bracket x 2
B-Cable Tie x 1
D
A
Smaller Hole
STEP 1
B
STEP 2
Grids Surface
STEP 3
STEP 4
A
Smaller Hole
STEP 5
STEP 6
C
