Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 4
EEI -1181
STASIS OFFICE DESK
Ax2
Ex2
Gx2
Hx1
STEP 1:
Place the
Left Leg (4)
to the
Central Rail (5)
as shown.
Please make sure that the concave surface of each
Washer (E)
faces to the head of each
Bolt (A)
when connecting.
Attach them by using
Bolts (A)
and
Washers (E)
through the pre-drilled holes on the
Central Rail (5)
and the
Left Leg (4).
Tighten
Bolts (A)
with the
Allen Wrench
(H).
Then cover the
Plastic Cap (G)
to the head of
Bolt (A)
as shown
.
Repeat the same steps for assembling the
Right Leg (3)
to the
Central Rail (5).
Hardware & Tool required
STEP 2:
Please put the
Glass
Top (1)
upside down on a flat and smooth surface as shown .
Attach the assembled
Central Rail (5)
,
Right Leg (3)
and
Left Leg (4)
into the bottom of
Glass Top (1)
by using
Bolts (D)
and
Flat Washers (F).
Use the
Allen Wrench (H)
to tighten the
Bolts (4)
clockwise until secure
.
Notice
：
Please make sure that the concave
surface of each
Washer (E)
faces to
the head of each
Bolt (A)
when connecting.
Dx16
Fx16
Hx1
Hardware & Tool required
