Cleaning and Maintenance
12
Lamp Glass - P8 / P12
The P8 and P12 Proofer /
Holding Cabinets are
fitted with 2 halogen
lamps. These are fitted
on the L/H inner side
panel, behind L/Hand
side rack.
a. Remove the L/Hand
side rack as shown
on prevous page.
b. Unscrew lamp glass
anti-clockwise to
remove.
c. Remove seal fitted
between lamp glass
and holder.
d. Wash the lamp glass
and seal using a soft
sponge and warm
water with a
detergent solution.
Rinse with clean,
warm water and dry
off.
e. Dry lamp glass
thoroughly with a dry
cloth.
f. To refit lamp glass,
screw in clockwise.
Do not over
tighten lamp glass.
g. Refit L/Hand side
rack as shown on
prevous page.
Lamp Glass - P10
P10 Proofer / Holding
Cabinets are fitted with 2
square, flush fitting,
halogen lamps. These
are fitted on the L/H
inner side panel, behind
L/Hand side rack.
a. To access the lamp
glass, firstly remove
the L/Hand side rack.
b. Wash lamp glass
using a soft sponge
and warm water with
a detergent solution.
Rinse with clean
warm water.
e. Dry lamp glass
thoroughly with a dry
cloth.
f. Refit L/Hand side
rack.
Periodic Maintenance
NOTE: All maintenance operations should only be
carried out by a qualified service person.
Controls and mechanical parts should be checked and
adjusted periodically by a qualified service person. It is
recommended that the appliance is serviced every 6
months.
Interior
Lamps
Unscrew Anti-Clockwise
Remove Seal
Summary of Contents for TURBOFAN P12M Series
Page 19: ......
