User Manual v1.0
Page 38
of 59
How to open ports in the router:
Note that normally, you would not have to do this. If you feel you need to, first double check as when you do a port
forward, it should automatically open the ports for you.
These are the default port that are open by default
WEB 80
SSH 22
HTTPS 443
RDP 3389
UDP 68
If you want to be use or open some of the uncommon ports to connect to your DVR or other devices from the
outside, below is the instruction on how to open up ports.
note that when you do a port forwarding rule, it normally opens the port by default so the below is normally not
needed.
Log into the router
Click on Advanced Mode --> Network Tab --> Firewall
Under Rules, click Add
For the Name, put whatever you like to describe it
Source Zone: Leave at WAN/USB
Protocol: Select which one you want or "Any" if you are not sure
Source Address: Leave it default "any"
Destination Address: (this is where you would enter the port you would like to open) example 2100
Action: Leave default at "accept"
Click "Save & Apply" to save the changes
Now the port is open in the router.
To actually use this, you may have to set a port forward rule
The easiest way is to upgrade to version 3.1 or later where has the port forwarding in the basic menu
Click on the basic mode --> Network Tab --> Port Forwarding
Click on Add
For Name, enter whatever you want to call it
Select the Protocol you want to use
Enter the external port that you want to forward to
Select your ip address that your device you want to forward to
Click on "Save"
Summary of Contents for MOFI4500-4GXELTE-SIM4 V2
Page 22: ...User Manual v1 0 Page 22 of 59 ...
