background image

MOHAWK MODEL RJ-50-AH-SERIES 

 

iv

 

HYDRAULIC CYLINDERS (MODEL SPECIFIC LIFTS): 

THE FOLLOWING MODELS ARE GUARANTEED FOR 5 YEARS (PARTS ONLY), FROM DATE OF SHIPMENT FROM FACTORY, 
FOR HYDRAULIC CYLINDERS, AGAINST DEFECTS IN WORKMANSHIP AND/OR MATERIALS WHEN THE LIFT IS INSTALLED 
AND USED ACCORDING TO SPECIFICATIONS: TWO-POST MODELS A-7, SYSTEM IA-10, LC-12, LMF-12, TP-16, TP-18, TP-20, 
TP-26, TP-30. 
 
ALL OTHER MODELS ARE GUARANTEED FOR TWO YEARS (PARTS ONLY), FROM THE DATE OF SHIPMENT FROM 
FACTORY, FOR HYDRAULIC CYLINDERS, AGAINST DEFECTS IN WORKMANSHIP AND/OR MATERIALS WHEN THE LIFT IS 
INSTALLED AND USED ACCORDING TO SPECIFICATIONS (EXCLUDING USL-6000, WHICH IS ONE YEAR). 
 
THE “

EXTENDED LIFETIME CYLINDER SEAL WARRANTY

” (BELOW) IS APPLICABLE TO THE FOLLOWING MOHAWK LIFTS 

ONLY: TWO-POST MODELS A-7, SYSTEM IA-10, LC-12, LMF-12, TP-16, TP-18, TP-20, TP-26, TP-30. SEE MOHAWK’S 

EXTENDED LIFETIME CYLINDER SEAL WARRANTY

” FOR SPECIFIC WARRANTY PROVISIONS FOR HYDRAULIC 

CYLINDERS. 
 
THE “

EXTENDED LIFETIME CYLINDER SEAL WARRANTY

” IS AS FOLLOWS: 

 

AS THE ORIGINAL PURCHASER OF A MOHAWK LIFT MANUFACTURED BY MOHAWK RESOURCES, LTD. YOU ARE 
ENTITLED TO AN EXTENDED CYLINDER SEAL WARRANTY. 
 
MOHAWK’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO SUPPLYING MODEL SPECIFIC CYLINDER SEALS. THE 
CUSTOMER IS RESPONSIBLE FOR SHIPPING AND HANDLING OF THE SEALS. MOHAWK IS NOT RESPONSIBLE/LIABLE 
FOR THE REBUILD OF CYLINDERS BY OTHERS. THIS WARRANTY IS NON-TRANSFERABLE AND RUNS TO THE ORIGINAL 
PURCHASER ONLY. 
 

STANDARD OPTIONS (ALL LIFTS): 

ALL STANDARD OPTIONS OF THIS UNIT ARE GUARANTEED FOR ONE YEAR FOR PARTS, FROM THE DATE OF SHIPMENT 
FROM FACTORY, AGAINST DEFECTS IN WORKMANSHIP AND/OR MATERIALS WHEN LIFT IS INSTALLED AND USED 
ACCORDING TO SPECIFICATIONS.  
 

CUSTOM LIFTS AND CUSTOM OPTIONS: 

ALL “CUSTOM” LIFTS AND/OR “CUSTOM” OPTIONS ARE GUARANTEED FOR ONE YEAR FOR PARTS, FROM THE DATE OF 
SHIPMENT FROM FACTORY, AGAINST DEFECTS IN WORKMANSHIP AND/OR MATERIALS WHEN LIFT IS INSTALLED AND 
USED ACCORDING TO SPECIFICATIONS. 
 

WARRANTY EXCEPTIONS (ALL LIFTS): 
ADJUSTMENTS:

 THIS WARRANTY DOES NOT COVER CASUAL AND ROUTINE ADJUSTMENTS SUCH AS, BUT NOT LIMITED 

TO: FITTINGS, SENSORS AND SWITCHES, ANCHOR BOLT RE-TIGHTENING, OR ANY SHIMMING OR ADJUSTMENTS 
REQUIRED DURING A PROPER AND PROFESSIONAL INSTALLATION BY A QUALIFIED INSTALLER. 

MAINTENANCE AND INSPECTIONS:

 IF THIS UNIT IS NOT MAINTAINED AND INSPECTED IN ACCORDANCE TO THE 

RELEVANT SECTIONS IN THE USERS MANUAL FOR THIS SPECIFIC MODEL, WARRANTY IS VOID. OSHA, ANSI AND 
MOHAWK REQUIRE THAT RECORDS MUST BE MAINTAINED TO PROVE THAT INSPECTIONS AND MAINTENANCE OF THIS 
UNIT HAVE BEEN ROUTINELY PERFORMED BY QUALIFIED INDIVIDUALS. 

ABUSE:

 IF THIS UNIT IS FOUND TO BE OVERLOADED (PURPOSELY OR UNKNOWINGLY), USED IN A SITUATION BEYOND 

ITS INTENDED FUNCTION, NOT MAINTAINED & INSPECTED REGULARLY, USED IN AN ABUSIVE ENVIRONMENT OR 
BEYOND NORMAL SHOP USAGE, THIS WARRANTY IS VOID IN ITS ENTIRETY. 

NON-EXISTENT PROBLEMS:

 FOR SERVICE VISITS, PART REPLACEMENTS, LABOR, ETC. FOR PARTS FOUND TO BE NON-

DEFECTIVE, OR FOR A UNIT DIS-FUNCTION THAT DOES NOT EXIST, IT IS THE LIFT OWNER THAT REQUESTED THE 
SERVICE VISIT WHO BEARS THE RESPONSIBILITY OF ALL RELATED EXPENSES. 

BATTERIES:

 ALL BATTERIES CARRY THE BATTERY MANUFACTURER’S WARRANTY. MAINTENANCE REQUIREMENTS AND 

ABUSE PROVISIONS ARE AS STATED BY THE BATTERY MANUFACTURER. REFER TO BATTERY MANUFACTURER’S 
WARRANTY. 

SPECIAL/MODIFIED INSTALLATIONS:

 THIS WARRANTY DOES NOT COVER “NON-TRADITIONAL” INSTALLATIONS. 

INSTALLATIONS ARE TO BE DONE ACCORDING TO SPECIFICATIONS, OR THE WARRANTY IS VOID. 

WEARABLE COMPONENTS:

 SOME ITEMS ON LIFTS ARE SUBJECT TO NORMAL “WEAR AND TEAR” AND ARE NOT 

COVERED UNDER THIS WARRANTY. 

NON-VEHICLE / RE-PURPOSED LIFTS:

 THIS WARRANTY DOES NOT COVER LIFTS THAT ARE “RE-PURPOSED” TO RAISE 

AND LOWER EQUIPMENT THAT ARE NOT CONSIDERED VEHICLES. 
 
* THIS WARRANTY SUPERSEDES ALL OTHER WARRANTY POLICIES PREVIOUSLY STATED AND IN ALL OTHER MOHAWK 
PRODUCT SPECIFIC LITERATURE (MANUALS, BROCHURES, ETC.). 
 
 

Rev 12/1/2015 

 

Summary of Contents for RJ-50-AH Series



































Reviews: