6
ENG
These instructions require special knowledge corresponding to an officially
acknowledged degree in one of the following professions:
- Electrical Equipment Installer or Electronics Engineer
- Systems mechanic for sanitary, heating and air condition technology
according to the profession designations officially announced in the Fe-
deral Republic of Germany, as well as according to comparable professions
within the European Community Law.
For the preparation of the manual, a state of knowledge corresponding to
a technician qualification in the mentioned occupational areas, has been
presupposed. Therefore, basic information from these occupational areas is
not described separately.
Expert Knowledge
Preconditions
Installation Situation
3. Connection line
2. Border acoustic insulation
1. Continuously elastic border strips
Screed and flooring, particularly hardwood flooring, can compress
the trough of the under-floor convector due to the thermal proper-
ties. We recommend the planning and use of proper insulation duri-
ng the installation phase.
The electrical connection is normally made on the right side of the unit,
when facing the window from the inside.
Site of Installation
Möhlenhoff ESK are exclusively intended for a horizontal installation in
floor areas. Möhlenhoff ESK can be installed in dry screed and cast plaster
areas as well as in cavity floors.
If used in areas with mastic asphalt, special measures have to be taken with
respect to temperature shielding, because no part of the ESK may become
warmer than 120°C!
4. Step-on acoustic insulation
