5
support@moixa.com www.moixa.com/support/ +44 207 734 1511
Moixa Technology Limited, registered in England and Wales at 150 Aldersgate Street, LONDON, EC1A 4AB.
All correspondence should be addressed to: Moixa Technology Limited, 29 – 31 Saffron Hill, London, EC1N 8FH.
In this document you will find guidance on the use of the Moixa Optimised Battery System. For
user manuals for other Moixa products, please go to www.moixa.com/support/
This document focuses on the Moixa Hub element of your Moixa Optimised Battery System,
although it provides general guidance and information for all the component elements, where
documentation from the original manufacturer exists, ensure that you refer to this information
as well, and note that if there is any discrepancy, the original manufacturer’s information takes
priority with respect to that component.
This document is not intended to replace or supersede any guidance from Victron, Pylontech, or
any other manufacturers. Where guidance for installation and use of these items exists, this shall
be followed by the customer.
Please read the following instructions carefully as failure to observe the precautions may result
in serious personal injury, property damage and will invalidate your manufacturer’s warranty.
2.0 Safety
Installing the Moixa Optimised Battery System will require modifications to the distribution
board or consumer unit (fuse box) of your property, in order to allow monitoring of the energy
characteristics of your home. Carrying out any electrical work in a home or workplace can be
dangerous, and only certified electricians may carry out the installation of the Moixa Optimised
Battery System, which must be in accordance with the national safety regulations BS7671 or
the equivalent applicable regulations in the country of installation.
Please read the following instructions carefully as failure to observe the precautions may
result in damage or could invalidate your Installation and Manufacturer’s warranties.
To ensure your product is safely and correctly installed, your installer must follow the guidance
laid out in the Installer Manual.
If any part of the Moixa Optimised Battery System becomes damaged, wet or if you notice
any unusual noises or smells, disconnect the Moixa Hub by switching off at the plug socket
and then unplugging the Moixa Hub and isolating the Pylontech battery modules and
Victron inverter by turning your isolator switch to OFF. Contact your Customer Support
Team as soon as possible.
In the event of a fire near the Moixa Optimised Battery System, perform the following
measures:
•
IfanypartoftheMoixaOptimisedBatterySystemisonfire,donottryto
extinguish it yourself.
Evacuate the property, call the fire brigade and inform them
that you have a Pylontech Battery on fire which contains Lithium Ion components. The
fire brigade will need to extinguish the fire using specialist equipment. The customer
should provide the MSDS
http://en.pylontech.com.cn/download.aspx?id=184
When
safe to do so, call Customer Support at the earliest opportunity.
1.0 Information in this User Manual
