MoJack 750XT Lift
14
STEP 10
Strapping Front Mower Tires to Wheel Pads
• Secure the front mower tires to the Wheel Pads using the Safety
Straps . Secure the hook on the Safety Strap to the Wheel Pad Cross
Bar and insert the Support Rod into the loop on the Safety Strap by de-
taching the Support Rod and then sliding the Safety
Strap Loop through and reattaching the Support Rod.
• Tighten the Safety Straps over the top of the tires
to secure mower to Wheel Pads.
Operating Instructions
STEP 11
Adjusting the Crank Handle
(optional)
• The optimal Crank Handle length is in the longer setting. Some
mowers have brush guards or larger hoods that interfere with
the longer Crank Handle. The Crank Handle can be adjusted by
removing the Nylock Nut and Carriage Bolt and re-attaching in
the shorter setting.
10
Wheel Pad Cross Bar
Support Rod
Safety Strap
Nylock Nut
Carriage Bolt
Using the MoJack 750XT (Steps 9 - 16)
STEP 9
Move Mower onto MoJack 750XT
The MoJack 750XT must be used on a solid
level surface.
• Drive or roll the mower onto the Wheel Pads.
Stop engine and remove the key.
Shorter Setting – 6” Radius
Longer Setting – 8” Radius
