14
MoJack EZ Max Lift
Operating Instructions
STEP 6
Aligning Wheel Pads to Fit Mower
• Position the jack in front of the mower.
• Remove Push Pins and adjust the wheel pad to align
with the mower’s front tires.
• Replace the Push Pins to lock the Wheel Pad Lift Arms
to the Lift Arm.
Wheel Pad Lift Arms must be equal distance from the
Lift Arm to maintain proper balance.
Using the Lift (Steps 8 - 15)
STEP 8
Move mower onto jack
The jack must be used on a solid level surface.
• Drive or roll the mower onto the Wheel Pads.
Stop engine and remove the key.
NOTE:
Wheel Pads accommodate wheel
sizes from 10” – 17” (25cm – 43cm).
Not for use with tires
over 17” (43cm) in size.
STEP 7
Reverse Front Tires of ZTR Mower
(optional – if not applicable, skip to
Step 8)
In some cases, the mower deck or anti-scalping wheels will hit the Lift
Arm while the mower is being raised. This is often the case if part of the
deck (including the anti-scalping wheels) protrudes past the center line
of the front wheels of the mower. If this happens:
• Rotate the front tires 180° so that they are in the reverse position.
• Slide the lift as close to the wheels as possible.
NOTE:
Reference Step 6 for Aligning Wheel Pads to fit ZTR mower.
Reverse
Wheel
Position
Forward
Wheel
Position
Summary of Contents for EZ Max 45001
Page 44: ......
