INTRODUCTION
Congratulations on your purchase of a Mojave Audio MA-50 Solid State Capacitor Microphone!
Your MA-50 was carefully designed and constructed using only the finest materials. The MA-50
microphone is capable of delivering superb performance and, with minimal care, will do so for
many years. Your MA-50 was thoroughly tested and given a factory burn-in prior to shipment.
The MA-50 is guaranteed to perform as specified and is suitable for recording even the most
demanding music, provided that the microphone is used sensibly.
For optimum performance from your new microphone, please read this manual thoroughly and
become familiar with the proper use of the MA-50.
UNPACKING AND INSPECTION
Carefully unpack your MA-50 microphone and verify that all of the components included with
the microphone are accounted for. Do not discard any packing materials! If anything is missing
or damaged, contact your dealer or Mojave Audio immediately.
Items included with the MA-50 are:
1. MA-50 microphone inside an aluminum style carrying case
2. MA-50 shock mount and European adapter (fitted to shock mount)
Verify that the serial number of your MA-50
matches correctly with the one on your receipt. The
MA-50 serial number can be found
inside the microphone housing. To access, simply unscrew
the bottom ring and slide the body off. When corresponding with Mojave Audio about your
microphone or when service is required, we will need to know the serial number, so keep it
handy.
