LW004-CT
13 www.mokosmart.com
Filter, UUID Filter, ADV Name Filter, Major Filter, Minor Filter and Raw Data Filter. Only if these
seven filter items are met at the same time can this filter condition be considered to be met.
Each filter item can be set to off, positive filter and reverse filter.
Off: Regardless of this filter item.
Positive filter: If the device being scanned matches the content of this filter item, it is
considered to meet the filter item.
Reverse filter: If the device being scanned does not match the contents of this filter
item, it is considered to meet the filter item.
Note:
For the RSSI Filter item, it can’t be set to positive filter.
Refer to
LW004-CT APP Guide
for
detailed Settings of filter items and an example.
3.2.2.1 Location Beacon Scanning
Location Beacon Scanning
is mainly used to scan the fixed location beacon. By scanning the
broadcast content of location beacon, the approximate location of the close contact can be
recorded and analyzed.
The following is the specific description of
Location Beacon Scanning
rules:
①
There are two sets of filter conditions, one is Filter Condition A, and other one is Filter
Condition B. Each filter condition has a separate switch setting, which can be arbitrarily switched
on or off.
②
When both of Filter Condition A and Filter Condition B are switched on, the relationship
between two sets of filter conditions can be set as AND or OR.
AND: Beacon information is stored and reported only when the data meets both Filter Condition A
and Filter Condition B.
OR: Beacon information is stored and reported when the beacon data meets either filter condition
A or filter condition B.
If only one condition is opening, the data that meets this filter condition will be saved and
uploaded.
Note:
When both Condition A and Condition B are off, the Location Beacon Scanning function will
stop working and stop reporting Location information.
③
There are seven filter items in each set of filter conditions, which are RSSI Filter, MAC Address
Filter, UUID Filter, ADV Name Filter, Major Filter, Minor Filter and Raw Data Filter. Only if these
seven filter items are met at the same time can this filter condition be considered to be met.
Each filter item can be set to off, positive filter and reverse filter.
Off: Regardless of this filter item.
Positive filter: If the device being scanned matches the content of this filter item, it is
considered to meet the filter item.
