LW004-CT
7 www.mokosmart.com
3.1.2
Social Distance Alarm
Distance alarm function is mainly used for distance keeping in public places. Users can set
different distance requirements according to different scenes, which can be achieved by setting
Alarm Trigger RSSI.
Example of hospital:
➢
All employees should wear the LW004-CT.
➢
By setting the broadcast information of LW004-CT and the
Filter Condition
of LW004-CT,
Unneeded Bluetooth device data can be successfully ignored. (Refer to
Chapter 7
for an
example of how to set a filter condition)
➢
Users can adjust the determination distance of social distance alarm by setting Gather
Warning RSSI.
➢
The system will judge all close contacts, if the distance of the close contact is less than the set
value, the device will trigger a distance alarm, at which time the device will vibrate, the
indicator light will flash red, and the
Distance Alarm Payload
will be reported immediately.
Distance Alarm Payload
mainly contains close contact data for close contacts that trigger
distance alarms.
➢
When the distance alarm is triggered, the corresponding employee should pay attention to his
or her position with others in time and keep a certain distance.
Note:
Users can choose whether to include location information in the Close Contact Data. If
location information is included, users need to install the location beacon in advance.
