MOKO LoRaWAN Gateway
MKGW2-LW
www.mokosmart.com
22
11.2 Backup & Upgrade
11.2.1 Backup
User can download the configured parameter file of the gateway to the local;
User can directly import the configured file into the current system. After the device is restarted,
the configuration will take effect.
Figure28 Gateway Configuration File Download and Upload
11.2.2 Upgrade
User can upgrade the system by uploading Upgrade File in WEB. You can check “Whether to save
the configuration” to ensure that the upgraded system parameters are consistent with the current
system configuration parameters.
Figure29 Gateway Firmware Upgrade On-line
USB upgrade method
：
Step1. Copy the upgrade file named “MKGW2-LW-Upgrade.bin” to the USB flash drive;
Step2. Insert the USB flash drive into the gateway USB Port, short press the RESET button, and
power LED will blink green that indicate the device upgrading now. With USB upgrade, the gateway
will automatically save the current system configuration parameters.
12 Restore Factory Settings
Press the reset button and hold on 5 seconds, then release, you can see the gateway restart again
and all LED turn to yellow.The gateway will restore factory setting and all gateway information
