MOKO TECHNOLOGY LTD.
MKL62ST-DT User Manual
www.mokosmart.com
@Copyright 2019 MOKO All Rights Reserved
sales@mokosmart.com
1 About This Manual
This manual is used to introduce the hardware interface of development board to help users get
familiar with AT commands of MKL62BA and quickly start with DEMO application
fi
rmware.
2 Packing List
3 Overview and Specification
3.1 Brief Introduction
MKL62ST-DT is a small, open-source IoT development board specially designed for MOKO
LORAWAN
®
-Based module MKL62BA.
The low-power SMT32 chip is used as the external MCU, and it is integrated with the Sensirion
SHT30 temperature and humidity sensor. By running the demo application
fi
rmware provided
by MOKO, users can quickly familiar with the LORA
®
-Based network and see the temperature
and humidity sensor data on the LORAWAN
®
-Based network server.
Users also can connect different external sensors through a rich peripheral interface to quickly
design and validate a LORA
®
-Based node device. Moreover, since the Arduino NANO
connection is compatible, it will be easy to begin the LORA
®
-Based application design process.
Items
Description
Development Board
The development board has been welded with the required
MKL62BA module, and has all available hardware interfaces.
Type-C USB cable
Used for USB power supply and data communication
2pin jumpers x 4
The jumpers are for 2.54 mm pitch headers used on
JP1,JP2,JP3,JP4
External LoRa dipole antenna
External multiband LoRa dipole antenna, 1.6dBi, 860-930MHz
IPEX to IPEX cable
By connecting two IPEX sockets,enable LoRa SMA connector
7pin header
Used to connect SMT32 peripheral P1
2.54mm pitch 2*3 pin header
Used for peripheral power supply J1
2.54mm pitch 1*15 female header
Used for connecting Arduino board P2
2.54mm pitch 1*4 female header
Used for connecting Arduino board P3
2.54mm pitch 1*2 female header x 2 Used for connecting Arduino board P6,P7
2.0mm pitch PH-2AWD 2pin
connector
Used for connecting battery
