2.2 Checking the nebulisers
1
Make sure both caps are removed from the
nebuliser.
2
Check if nebulisers are working by spraying
against a dark background. You should see a
fine mist.
3
If you cannot see the mist then the nebuliser may
be blocked from crystallised Bitrex
®
Solution.
See maintenance section for further instructions.
4
Continue to check the nebulisers throughout the
Fit Test.
2.3 Instructing the test person
The test person should not eat, drink [except plain water], smoke or chew gum
for at least 15 minutes before the test.
Explain the reasons for Fit Testing and the Fit Test procedures to the test person.
2. Prior to Fit Testing
Makesurecapsareremoved
Youshouldseeafinemist
|
07
