AquaMax
®
2000/4000 Microplate Washer User Guide
34
0112-0151 K
Running Programs
To run a stored program
1.
Make sure that all appropriate reagent bottles are connected to
Liquid Input and Pressure fittings on the left side of the
instrument.
2.
Make sure that the waste tubing is connected to the Waste
Output fitting and the Waste bottle.
3.
Load the appropriate microplate in the plate carriage.
4.
On the
Main
tab, touch the program from the list and touch
Run
.
When a program is running, the touch screen displays a status
dialog.
Figure 3-2:
Status dialog
Note:
Gray programs are not compatible with the installed wash head.
You cannot run a gray program.
Note:
Red programs indicate a change in the plate type. When you run
a red program, the message “Plate parameters changed” appears. Click
OK to acknowledge the changes and return to the program list. The red
is removed and you can run the program as usual. Click Cancel to exit
the program without changing the red status indicator.
Summary of Contents for AquaMax 2000
