FlexStation 3 Benchtop Multi-Mode Microplate Reader User Guide
84
0112-0127 B
If you select a partial-plate for reading, only those wells selected will be
visible in the data display. In the figure below, the Plate section reflects
that wells A1 through H2 have been selected for reading.
Figure 3-19:
Plate Section with Selected Wells to Read
Automix
The Automix function is a patented feature that allows you to set
automated shaking of the microplate before and between readings.
Select
Before First Read
to shake the microplate before the first
wavelength reading only. You can also set Automix to shake the plate
Between Reads
.
Select the check box next to the type of shaking you want and then type
a value in the field on the right to indicate how long shaking should last.
Automix time can last from 1 second to 999 seconds.
Figure 3-20:
Automix Settings
FlexStation_manual.book Page 84 Tuesday, June 25, 2013 10:22 AM
