ScreenWorks Software Overview
124
0112-0109 H
Wash Tips (Standard Pipettor)
The table below describes the options available in the
Wash Tips
process page, for a standard pipettor:
Item
Description
Fluid Type
Select the fluid in the wash reservoir during tip washing,
from wash fluid container A or B.
Pump Speed
Select the speed (slow or fast) you want the pump to fill
and empty the wash reservoir.
Note:
Molecular Devices recommends you use
Fast
except with volatile solvents.
Wash Cycles
From the list, select the number of times that fluid cycles
through the wash reservoir. For each cycle, the pipettor
executes the number in the
Strokes
field.
Strokes
From the list, select the number of times to aspirate and
dispense wash fluid.
Volume/Stroke Enter
the
volume
(in
μ
L) of fluid to be aspirated and then
expelled for each stroke.
Hold Time
Enter the length of time (in seconds) to pause between
aspirating and expelling fluid.
Aspirate Speed
From the list, select the speed (in
μ
L/s) to aspirate fluid.
Dispense Speed
From the list, select the speed (in
μ
L/s) to dispense fluid.
Unload Tips After
Washing
Check this option to have tips removed from the pipettor
head after washing is complete.
Summary of Contents for FLIPR Tetra
