Molecular Devices QPix 450 User Manual Download | Manualshive

Page: 13 / 257

background image

5031498 G

13

Chapter 1: Introduction

With the QPix® 450 Colony Picking System or QPix® 460 Colony Picking System from Molecular
Devices, you can control selective microbial colony picking. Multiple users can select and
collect microbial colonies from various receptacles using the QPix 450 or 460 system
Instrument with the QPix 450/460 Colony Picking Software.

Before operating the instrument or performing maintenance operations, make sure you are
familiar with the safety information in this guide. See

Safety Information on page 7

.

For research use only. Not for use in diagnostic procedures.

Functionality of the QPix 450 or 460 System

The QPix 450 or 460 system is part of the QPix 400 series. The QPix 450 or 460 system offers a
range of features to accommodate various requirements for picking of microbial colonies
including multiple imaging modes, organism-specific pins, agar height sensor, and specific
algorithms to detect variable biological samples. Other functions include sample rearraying,
replication, organism-specific pins, color screening, gridding, and plating of liquid bacterial
samples. See

Replacement Parts and Optional Extras on page 247

.

The QPix 450 or 460 system is useful for working with applications such as protein engineering,
protein evolution, directed or enzyme evolution, protein expression, transformation, and sub-
clone management.

The QPix 450 or 460 system is available with white light or fluorescent imaging. Color filters,
such as for blue-white screening, are available in combination with white light imaging.

Multiple fluorescent filters ensure compatibility with a wide range of fluorescent cloning dyes
and proteins and enable the system to reveal unique information about individual colonies.
Fluorescent imaging is available as an option.

After colonies are located using a CCD camera, they are picked at high speed from source
receptacles and then inoculated into pre-filled 96-well or 384-well plates. Colonies of interest
can be rearrayed from a library into new plates.

To optimize these systems, Molecular Devices has developed a range of plastic consumables
for use with the instrument. The destination plate bed enables versatile use of shallow,
standard, and deep-well plates in various combinations. Organism-specific pins can be ordered
to optimize the efficiency of transfer.

You can log all your processes such as picking, replicating, and re-arraying with the QPix 450 or
460 system Colony Picking. The software lets you tag important samples to enhance the
history, location, and extra details of sample-specific data.

1

«
...
11
12
13
14
15
...
»

Summary of Contents for QPix 450


































































































































































































































































Reviews:

No comments

Related manuals for QPix 450

Brand: B&K Pages: 5

Brand: B&K Pages: 28

Brand: Taber Pages: 27

Brand: idiag Pages: 12

Brand: TC Electronic Pages: 2

Brand: Bahco Pages: 131

Brand: Bahco Pages: 126

Brand: CAMAG Pages: 40

Brand: YYZ Lighting Pages: 3

Brand: Camp Safety Pages: 118

Brand: Ultrafast Systems Pages: 39

Brand: Mackworth Pages: 2

Brand: CAMPAGNOLA Pages: 209

Brand: R.M. Young Pages: 10

Brand: Hammer Strength Pages: 18

Brand: quadient Pages: 14

Brand: Qu-Bit Electronix Pages: 31

Brand: Cannon Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands