Battery Powered Crimping Tool
Order No: TM-638161000
Release Date: 04-03-13
UNCONTROLLED COPY
Page 12 of 21
Revision: D
Revision Date: 12-16-15
2.3 Preventive Instructions
WARNING:
Do not dispose of the battery in a fire
. It will vent fumes and may explode.
Failure to observe this warning could result in severe injury from harmful fumes or burns from flying debris
WARNING
:
Inspect tool and dies before use. Replace any worn or damaged parts. A damaged or
improperly assembled tool can break and strike someone nearby. Failure to observe this warning could result
in severe injury or death.
CAUTION:
Do not operate the tool without the dies. Damage to the ram or crimping head can result.
Do not operate with the crimping head open. Damage to the ram or seals can result.
This tool is not designed for continuous use. After 100 crimping cycles, allow the crimping tool to cool down for
15 minutes.
Do not place the tool in a vise. The crimping tool is designed for hand-held operation only.
This tool may be used in damp or wet environments; however, we recommend air-drying the tool before use if it
becomes soaked.
Use this tool for the manufacturer’s intended purpose only.
Failure to observe these precautions may result in injury or property damage.
CAUTION:
Do not allow anything to contact the battery’s terminals.
Do not immerse the battery in liquid. Liquid may create a short circuit and damage the battery.
If the battery is immersed, contact your service center for proper handling.
Do not place the battery into a pocket, tool pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and damage the battery.
Do not place a battery on moist ground or grass. Moisture may create a short circuit and damage the battery.
Failure to observe these precautions may result in injury or property damage.
Avoid dropping this tool. Extreme shock may damage the internal mechanism and result in malfunction of the tool.
