Battery Powered Crimping Tool
Order No: TM-638161000
Release Date: 04-03-13
UNCONTROLLED COPY
Page 17 of 21
Revision: D
Revision Date: 12-16-15
4.2 Battery and Battery Charger
WARNING
:
Do not dispose of the battery in a fire. It will vent fumes and may explode.
Failure to observe this warning could result in severe injury from harmful fumes or burns from flying debris
CAUTION:
Do not store the battery at more than 60 °C (140 °F). Damage to the battery can result.
Do not use another manufacturer’s charger. Other manufacturers’ chargers may overcharge and damage
the battery.
Do not attempt to open the battery. It contains no user-serviceable parts.
Failure to observe these precautions may result in injury or property damage.
CAUTION:
Do not allow anything to contact the battery’s terminals.
Do not immerse the battery in liquid. Liquid may create a short circuit and damage the battery.
If the battery is immersed, contact your service center for proper handling.
Do not place the battery into a pocket, tool pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and damage the battery.
Do not place a battery on moist ground or grass. Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in injury or property damage.
The 63816-1000 Crimping Tool is supplied with two batteries and a battery charger. New batteries must be
charged before use.
The charging unit is run with a nominal voltage of 115V or 230V (for Europe) and a frequency of 50-60Hz.
Battery Charger indicator lights:
Constant Glowing
Flashing Glow
Meaning
Green
Battery is charging. Status of charging < 80 %
Green
(Slowly)
Battery is charging: Status of charging: = 80 %
Green
(Quickly)
Battery is completely charged.
The battery charger has no power.
Please check the connection with the power.
Yellow
The battery pack is warm
Yellow
The battery pack is too hot. Charging will begin when
the temperature of the battery pack drops
