Battery Powered Crimping Tool
Order No: TM-638161000
Release Date: 04-03-13
UNCONTROLLED COPY
Page 21 of 21
Revision: D
Revision Date: 12-16-15
Note:
The following Modular Crimp Heads, Adapters and Cutting Head are sold separately and are not included with the
63816-1000 Battery Powered Tool.
The chart below shows applications for the Battery Powered Tool. See Figure 5-2 to 5-5.
Applications for the Battery Powered Tool
Crimp Head Order No. (Sold separately) Tool Order no. Tool Description
Figure 5-2
DIN style
63816-1100
63816-1000
Battery Powered
Crimping Tool
130 kN
Figure 5-3
U-Die
63816-1200
Figure 5-4 Cutting Tool 63816-1400
Power Crimp and Cutting Heads (Dies not included with Crimp Heads)
63816-1100 DIN style Crimp Head
63816-1200 U-Die Crimp Head
Figure 5-2
Figure 5-3
63816-1400 Cutting Tool Head
Figure 5-4
5.2 Troubleshooting
Make sure the battery is charged before toubleshooting this tool.
Symptom
Cause
Solution
Tool is inoperative
Dirt, contaminants, etc.,in ram area of tool.
Clean the tool.
Battery unit contacts corroded.
Clean contacts with pencil eraser or contact cleaner.
Battery unit contacts damaged.
Reform the contacts.
Tool parts worn or damaged.
Contact a Molex representative.
Dies stop
during operation
Battery charge is low.
Charge or replace battery unit.
Visit our Web site at http://www.molex.com
