Battery Powered Crimping Tool
Order No: TM-638161000
Release Date: 04-03-13
UNCONTROLLED COPY
Page 4 of 21
Revision: D
Revision Date: 12-16-15
WARNING
WARNING
Do not use solvents or flammable liquids
to clean the crimping tool.
Solvents or flammable liquids could ignite
and cause serious injury or property damage.
An incomplete crimp can cause a fire.
Use proper die, connector, and cable combinations.
Improper combinations can result in an
incomplete crimp.
The relief valve will sound to indicate a completed
crimp. If you do not hear the sound of the relief,
valve the crimp is not complete.
Failure to observe these warnings could result in severe
injury or death.
WARNING
WARNING
Do not use
compressed air to clean this tool.
The forces created by compressed air can
force debris into the tool.
Failure to observe these precautions may
result in injury or property damage.
Do not dispose of the battery in a fire.
It will vent fumes and may explode.
Failure to observe this warning could result in
severe injury from harmful fumes or burns from
flying debris
CAUTION
Do not operate the tool without the dies. Damage to the ram or crimping head can result.
Do not operate with the crimping head open. Damage to the ram or seals can result.
This tool is not designed for continuous use. After 100 crimping cycles, allow the crimping tool to cool down for 15 minutes.
Do not place the tool in a vise. The crimping tool is designed for hand-held operation only.
This tool may be used in damp or wet environments; however, we recommend air-drying the tool before use if it becomes soaked.
Use this tool for the manufacturer’s intended purpose only.
Failure to observe these precautions may result in injury or property damage
CAUTION
Do not allow anything to contact the battery’s terminals.
Do not immerse the battery in liquid. Liquid may create a short circuit and damage the battery.
If the battery is immersed, contact your service center for proper handling.
Do not place the battery into a pocket, tool pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and damage the battery.
Do not place a battery on moist ground or grass. Moisture may create a short circuit and damage the battery.
Failure to observe these precautions may result in injury or property damage.
CAUTION
Do not store the battery at more than 60 °C (140 °F). Damage to the battery can result.
Do not use another manufacturer’s charger. Other manufacturers’ chargers may overcharge and damage the battery.
Do not attempt to open the battery. It contains no user-serviceable parts.
Failure to observe these precautions may result in injury or property damage.
CAUTION
Never
perform any service or maintenance other than as described in this manual.
Never
modify, alter or misuse the equipment
Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Failure to observe this precaution may result in injury and property damage.
