Battery Powered Crimping Tool
Order No: TM-638161000
Release Date: 04-03-13
UNCONTROLLED COPY
Page 7 of 21
Revision: D
Revision Date: 12-16-15
7
1
2
3
4
5
6
Figure 1-1
Description
The Molex Battery Powered Tool is designed to crimp large terminals with the use of interchangeable crimp heads and die
kits. This tool has a trigger actuated retraction system which returns the crimping dies to the starting position after the
maximum force is reached. It is equipped with a special brake that will stop the forward motion of the crimping dies when the
trigger is released. The crimping head can be rotated 360° for better access in difficult working situations.
1.1.
Features
Crimps a wide range of products with interchangeable modular crimp heads or adapters and tool kits, which
reduce the overall cost and provide production flexibility.
Power crimp heads and dies are easily and quickly interchanged to reduce production down time.
Complete portable system that allows the tool to be moved and stored easily.
1.2.
Principal Mechanical Parts of the 63816-1000 Battery Powered Tool.
The Battery charger is not shown.
Item
Description
Function
1
Operating Switch
Release of the crimping process
2
Label
Type description, manufacturer information and technical data
3
Battery Release
Release Button for the battery
4
Battery
Battery Li-lon
5
Return Lever
For opening of the die sets after the crimping process is done
6
Locking Bolts
For locking and releasing the adapter
7
Adjusting Unit Adapter Adjusting unit for the cutting head and adapters with die sets
The serial number can be found on the housing near the battery connection
