IDT Hand Tool
Doc No: ATS-638259900
Release Date: 05-24-13
UNCONTROLLED COPY
Page 5 of 6
Revision: A
Revision Date: 05-24-13
CAUTIONS:
1.
Manually powered hand tools are intended for low volume, prototyping, or field repair. This tool is
NOT
intended for production use. Repetitive use of this tool should be avoided.
2.
Insulated handles are not protection against electrical shock.
3.
Wear eye protection at all times.
4.
Use only the Molex connectors and wires specified for this tool.
Applications for the Modular Crimp Head
WARNING
:
NEVER
operate, service, install, or adjust this Modular Crimp Head without proper instruction and
without first reading and understanding the instructions in the proper Manual or Specification Sheet. See Chart
below for the correct Manual or Specification Sheet.
WARNING
:
NEVER
install tooling or service a powered tool while it is connected to any power source.
Disconnect the power source (electric or pneumatic) from the actuator
CAUTION:
Keep fingers away from the crimping area when operating a powered tool. It can cause severe
injury.
CAUTION:
Wear safety glasses when operating or servicing this tool.
The chart below shows all applications for this Modular Crimp Head.
Modular Crimp Head
Order No.
Tool
Order no.
Tool Description
Adapter
Order No.
Adapter
Description
Figure No.
63825-9970
63816-0000 Hand Crimp Frame (Short)
N/A
N/A
6
63816-0050 Hand Crimp Frame (Long)
N/A
N/A
6
63816-0200 Battery Power Tool (110 V) 63816-0600 Battery Power Crimp Adapter
7
63816-0250 Battery Power Tool (220 V) 63816-0600 Battery Power Crimp Adapter
7
63816-0100
Air Power Tool
63816-0700
Air Power Crimp Adapter
8
Applications for the Modular Crimp Head
Hand Crimp Tool
Battery Powered Tool
Air Powered Tool
Figure 6
Figure 7
Figure 8
MODULAR
CRIMP
HEAD
LOCKING
PINS
HAND
CRIMP
FRAME
LONG
OR SHORT
AIR
POWER
TOOL
MODULAR
CRIMP HEAD
LOCKING
PINS
LOCKING
PINS
AIR POWER
CRIMP
ADAPTER
MODULAR
CRIMP
HEAD
BATTERY
POWER
CRIMP
ADAPTER
LOCKING
PINS
LOCKING PINS
BATTERY
POWERED
TOOL