Tool Kit for AviKrimp
Fully Insulated and-Insulated Quick Disconnect Flags
Doc No: ATS-6400188HM Release Date: 04-08-15
UNCONTROLLED COPY
Page 1 of 9
Revision: B
Revision Date: 06-17-15
Application Tooling
Specification Sheet
Tool Kit
Order No. 64001-8870
Hand Crimp Tool
Order No. 64001-8800
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomically designed soft handles
Precisely designed crimping profiles with simple contact positioning
Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
SCOPE
Products: AviKrimp
Fully Insulated and-Insulated Quick Disconnect Flags 10-12 AWG.
Testing
Mechanical
The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The
following chart shows the UL specifications for various wire sizes. The tensile strength is shown in pounds and
indicates the minimum acceptable force to break or separate the terminal from the conductor.
Wire Size (AWG)
*UL - 310
12
70
10
80
*UL – 310 – Quick Disconnects
CONDITIONS:
The following is a partial list of the product part numbers and their specifications that this tool is designed to
crimp. We will be adding to this list and an up to date copy is available on www.molex.com.
Wire Size: 10 – 12 AWG 5.00 – 3.30 mm²
Terminal No. Terminal Eng. No. (REF)
Wire Strip Length Insulation Diameter Maximum
In.
mm
In.
mm
19006-0019
C-5211
.344
8.73
.245
6.22
19007-0040
C-2211
.344
8.73
.260
6.60
19007-0082
C-2211V
.344
8.73
.260
6.60
TYPE 4C
