Distributor of Molex Connector Corporation: Excellent Integrated System Limited
Datasheet of 0640054100 - AT-FIFG CRIMP TOOL HEAD
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
AT-FIFG Air Head Crimp Tool
Doc No. 64005-4100 Release Date: 09-22-03
UNCONTROLLED COPY
Page 6 of 6
Revision: A
Revision Date: 09-22-03
Certificate of Calibration
Tool Order Number -----------------------------
Tool Eng. Number -----------------------------
Tool Revision ----------------------------
Serial Number -----------------------------
Date of Manufacture ----------------------------
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = -------------------- Actual = --------------------
Range Conductor Nest # 2 = -------------------- Actual = --------------------
Technician --------------------
Date of Calibration --------------------
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Molex Application Tooling Group
1150 E. Diehl Road
Naperville, IL 60563
Tel: (630) 969-4550
Fax: (630) 505-0049
7 / 7
7 / 7
