AT-1992 Hand Crimp Tool
Doc No:ATS-640070100
Release Date: 10-03-02
UNCONTROLLED COPY
Page 15 of 15
Revision: J
Revision Date: 08-08-13
Air Powered
Crimp Tool Head
Krimptite
and
VersaKrimp
Certificate of Calibration
Order No. 64007-0100
Engineering No. AT 1992
Tool Order Number -----------------------------
Tool Eng. Number -----------------------------
Tool Revision ----------------------------
Serial Number -----------------------------
Date of Manufacture ----------------------------
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = -------------------- Actual = --------------------
Range Conductor Nest # 2 = -------------------- Actual = --------------------
Range Conductor Nest # 3 = -------------------- Actual = --------------------
Technician --------------------
Date of Calibration --------------------
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
