AT-200 Air-Powered Crimping Tool
Doc No: TM-192790001
Release Date: 07-01-02
UNCONTROLLED COPY
Page 6 of 20
Revision: G
Revision Date: 01-17-14
General Description
1.1 Description
The AT-200 Air-Powered Crimping Tool is a hand
held pneumatic tool weighting less than two pounds.
It is designed to crimp high quality and consistent
crimped terminals. This tool operates on standard
shop air (85 to 95 PSI) and crimps wire ranges from
26 to 8AWG.
1.2 Features
Crimping dies are easily and quickly
interchanged to reduce production down time.
Complete portable system that allows tool to be
moved and stored easily.
Tool may be used as a Potable tool, suspended
over head or bench mounted.
Higher volume output with less operator fatigue.
1.3 Technical Specification
Pneumatic:
Supply Pressure: 100 PSI (6.9 Bars) max
Cycle Time:
15 seconds
Weight
0.9kg
(2lbs)
1.4 Delivery Check
Carefully remove the AT-200 Air-Powered
Crimping Tool from its shipping container and
determine that the following items are included in
the package.
19279-0001
Air-Powered Crimping Tool
19279-0140
Air Hose 1/8 NPT Male
TM-192790001
Instruction Manual
1.5 Tools
The following tools are recommended for setup
and adjustments to this tool.
1.
Metric standard hex wrench set
2.
Inch standard hex wrench set
3.
Adjustable wrench
4.
Wire stripper / cutter
5.
Screw driver
Can Also Be Used With:
19078-0307 Bench Adapter Assembly with Foot
Switch
64001-4000 Electrical Control Box
1.6 Specification Sheets
Molex ships specification sheets with every Air
Crimp Tool Head. These Tool Heads are not
included with the AT-200 Air-Powered Crimp Tool.
They are ordered separately. The specification
sheet contains the following:
Terminal numbers
Wire AWG ranges
Insulation diameter ranges
Strip lengths
Pull Force
Crimp heights
Bell mouth
Bend, twist and roll limits
Tooling parts list and assembly
These are available on the Molex website
(www.molex.com).
