AT-AFIFG Air Crimp Tool Head
Doc. No: ATS-640054300
Release Date: 10-01-03
UNCONTROLLED COPY
Page 6 of 6
Revision: B
Revision Date: 05-05-04
Air Powered
Crimp Tool Head
AviKrimp™
Certificate of Calibration
Order No. 64005-4300
Engineering No. AT AFIFG
Tool Order Number -----------------------------
Tool Eng. Number -----------------------------
Tool Revision ----------------------------
Serial Number -----------------------------
Date of Manufacture ----------------------------
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = -------------------- Actual = --------------------
Range Conductor Nest # 2 = -------------------- Actual = --------------------
Technician --------------------
Date of Calibration --------------------
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
