AT-5763 Air Crimp Head Tool
Doc. No: ATS-640053000
Release Date: 05-29-03
UNCONTROLLED COPY
Page 6 of 6
Revision: C
Revision Date: 03-10-05
Air Powered
Crimp Tool Head
Avikrimp
Certificate of Calibration
Order No. 64005-3000
Engineering No. AT 5763
Tool Order Number __________________
Tool Eng. Number___________________
Tool Revision______________________
Serial Number_____________________
Date of Manufacture
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________- Actual = ____________-
Technician _______________________-
Date of Calibration __________________-
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com