AT5762 Air Crimp Head Tool
Doc. No: ATS-640051100
Release Date: 12-10-02
UNCONTROLLED COPY
Page 6 of 6
Revision: D
Revision Date: 01-24-11
Air Powered
Crimp Tool Head
Avikrimp
Certificate of Calibration
Order No. 64005-1100
Engineering No. AT 5762
Tool Order Number __________________
Tool Eng. Number___________________
Tool Revision______________________
Serial Number_____________________
Date of Manufacture
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________ Actual = ____________
Technician _______________________
Date of Calibration __________________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
