CS 150 Battery Crimping Tool
Doc No: ATS-638160200
Release Date: 12-06-07
UNCONTROLLED COPY
Page 18 of 21
Revision: A
Revision Date: 12-06-07
5.4 Disposal
When this tool is no longer operating properly the different components of this tool will need to be disposed of
separately.
1. The hydraulic oil must be disposed of at a local drop-off recycling center.
ATTENTION
Disposal of Hydraulic fluid represents a danger to ground-water. Uncontrolled draining of
or improper disposal is under penalty (environmental liability law) thru the Environmental
Protection Agency (EPA) guidelines.
2. The battery must be disposed of according to the Rechargeable Battery Recycling Corporation
(RBRC) guidelines.
3. The remaining parts of this tool must be disposed of according to the domestic environmental
standards or the Environmental Protection Agency (EPA) guidelines.
4. Because of possible environmental damage, we recommend disposal of the tool by a professional
company.
ATTENTION
Do not dispose of this tool in your residential or commercial waste,
as it would be hazardous to the environment.
5.5 Warranty
All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect
occur, we will repair or exchange the tool free of charge. This repair or exchange will not be applicable to
altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping, fixturing, or use
of handle extensions voids this warranty. After one year Molex recommends the crimping tool be returned to
a Molex representative for inspection. Only the heads of the crimping tool are permitted to be changed by the
operator.
ATTENTION
Do not damage the seals of this tool.
If seals are damaged the warranty is invalid.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
