PRODUCT APPLICATION SPECIFICATION
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REVISION
DESCRIPTION
REVISED
APPLICATION SPECIFICATION FOR
MICRO-LOCK PLUS 2.0 SINGLE ROW
CHANGE NO.
682239
REVISED BY
SOKUMURA01
DATE
2021/02/09
DOC TYPE
DOC TYPE DESCRIPTION
DOC PART
SERIES
REV APPR BY AIDA
DATE
2022/06/30
PS
APPLICATION SPECIFICATION WORD
A03
505570
INITIAL RELEASE
CUSTOMER
DOCUMENT NUMBER
REVISION
SHEET
INITIAL DRWN KUSATO
DATE
2016/04/20
GENERAL MARKET
5055700001
E
6
OF
49
INITIAL APPR
TKANEKO
DATE
2016/04/21
PROCEDURE: 2090580010-ES TEMPLATE: 2090580010-PAS-A4 REVISION: A1
【
3. Instructions
】
3-1. Product exterior
1.
There is no influence on the product performance though the black spots or bubbles etc. might be confirmed on
the plastic part of this product and the color might be different (discoloration by secular distortion etc.).
2.
Slide marks may sometimes appear in plating part of the product, but there is no impact on the function of this
product.
3.
Resin and terminal plating may have some changes in color after reflow, but there is no negative impact on the
function of this product.
4.
Connectors may be damaged by applying force in the machines. Please confirm before use.
5.
Regarding the movable parts of the connector (mold lance, positive lock part), whitening of the resin may occur,
but there is no negative impact on the function of this product.
3-2. Applicable wire and crimp tooling
1.
Guarantee is void when product is used with wire out of application range specified in the product specifications.
2.
Guarantee is void when product is used with tooling not specified by Molex.
3.
The recommended electric wire is tin plating. Please confirm separately about the use of other electric wires.
3-3.
About safekeeping before harness process and the surface mount process
1.
Please keep product with the delivery being in a state. Also, please keep it under normal temperature and
humidity avoiding direct sunlight.
2.
Please do not allow external force from being applied during the storage as it may cause damage.
3.
During handling, avoid shock or dropping products as it may cause damage.
4.
First-in, first-out of the stock is recommended.
5.
Keep product in original packaging before using.
