─
6
─
Chapter 4 Operation
1.
Preparation
Take out the instrument from the packing carton and tear off the tape on the edge of the
operation window, then open it and take out the foam. First please screw out the fixed
screw of position
①
as below .Second please screw the screw of
position ②
then you
can take out the baffle and release the moving component.
Note: Be careful in operating or the magnetic rod will break.
2.
Connect the power
Connect one end of power cord to the instrument socket and the other to power
(AC100~240V),
then turn on the power switch.