EN
36
Technical Data
Article number:
Model number:
Power supply:
Power:
Protection class
Capacity:
Timer:
9
RA-001
220-240 V~ 50-60 Hz
1800 W
I
9 l
Up to 60 minutes; “Drying” programme: 2 – 24 hours
Temperature setting:
65°C – 200°C (130°F – 400°F)
Troubleshooting
If the device does not work properly, ¿ rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the following steps, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
The device does not
work. The displays on
the control panel do
not switch on.
The mains plug is not
inserted correctly in the plug
socket.
Push the mains plug into the
plug socket as far as it will go.
The plug socket is defective. Try another plug socket.
No mains voltage is present. Check the fuse of the electrical
distributor (fuse box).
The overheating protection
has been triggered.
Pull the mains plug out of the
plug socket and allow the
device to cool down completely.
Then try again. If the device still
cannot be switched on, contact
the customer service depart-
ment.
The fuse in the elec-
trical distributor (fuse
box) is triggered.
Too many devices connect-
ed to the same circuit.
Reduce the number of devices
in the circuit.
02095_ 02363_ 04180_ 04184_ 04189_de-en-fr-nl_A5_V2.indb 36
12.10.2018 14:43:35
0ROLQR5HWDLO
1$/DUHQ
WKH1HWKHUODQGV
LQIR#PROLQRUHWDLOFRP
