Step7
Step8
Step9
Loosen the adjustable knob (22) and
insert the handlebar stem (3) into the
mainframe (1). After align the hole to
the adjustable knob (22), then secure
the adjustable knob (22).
Put the handlebar (4) onto the
handlebar stem (3) and make the
holes aligned completely. Tighten
them with 4 sets hexagon socket
bolts (12), spring washers (14),
washers (13) securely.
Put the computer (15) onto the
handlebar (4) make the holes aligned
completely.tighten them with 4 stet
Cross internal(17) Angle
screw,washers (13) securely.Then
plug the sensor connector (16) into
the connector of the computer (15).
7
