4. Installation of side brush
• Make the left side brush (L) and the right side brush (R) correspond
to L and R on the bottom casing, press L and R and the side brushes
are installed till you hear a “cracking” sound.
5. Starting up and charging
• Long press the power button to switch on the robot. Charge the
robot on charging dock until the power indicator light is turned on.
Note :If the machine cannot be started due to low battery, please
charge the host on the charging dock and the machine will be started
automatically. The machine can work normally only when the battery
level is above 20%.
6. Start Cleaning
• After the robot is powered on, short press the power button on the
robot or use MOMAX Smart APP to start cleaning. (Press any button
to pause during cleaning).
Note:
• The sweeping robot cannot be used to remove liquid.
• If the battery level is less than 20% , the machine cannot work. Please
charge it.
• The machine will return to the charging base automatically if the
battery level is less than 20% in use and will be powered off and start
cleaning automatically after the battery level reaches 80%.
• Please clear various wires (including power line of charging base) on
the ground before use so as to avoid outage and damage of objects
or wires when they are dragged by the machine.
7. Installation of mopping module
• Installation of mopping cloth: paste the mopping cloth flatly to the
bottom of water tank.
Note : Please clean the mopping cloth after using to keep it in good
cleaning condition.
10
11
Summary of Contents for Smart Elite-Cleanse RO5S
Page 2: ...Product Information p 2 23 產品資料 p 24 43 產品資料 p 44 63 1 ...
Page 35: ......