4.4.2 Best practices for riding range
For optimal riding range and to minimize wear of the moving parts on your e-bike, try to
make a habit out of the following best practices:
•
Select an appropriate gear for the riding speed and pedaling speed (cadence).
Shift gears often. Choose a relatively low gear and high, but comfortable pedaling
cadence. This provides an optimal ratio between power output and energy
consumption in almost all riding scenarios.
Don't stay in one (high) gear. Setting off and riding at lower speeds in a high (heavy)
gear will result in higher energy consumption.
Release pressure on the pedals while shifting gears.
•
Select the right assist level.
Let the " Smart Assist" function control the assist level automatically (availability may
vary by specification/country).
Choose the lightest manual assist level that you need.
•
Ride in harmony with traffic and the environment.
Try to ride at a steady speed and keep the momentum going. Fewer decelerations
require fewer accelerations, which minimizes power consumption.
•
Keep the load weight minimal.
Remove any items and/or removable accessories that you don't need.
•
Keep the e-bike clean and in optimal technical condition.
Check and maintain tyre pressure regularly.
Check and maintain the drivetrain (chain, chainwheel, sprockets, etc.) regularly.
Always bring your e-bike to your dealer for the scheduled periodic maintenance.
4.5 EnergyPak
4.5.1 First use
A new EnergyPak is shipped in a protective ‘hibernate’ state. It must be activated before it
can be used. Usually, the dealer will have activated and fully charged the EnergyPak before
delivery. If not, you take the following steps to activate it:
• Push the energy level check button on the EnergyPak (see the topic on EnergyPak
power level indicator for details).
The LED indicator of the EnergyPak will not light up when it is in hibernate state.
• Connect the charger to the EnergyPak (see the topic on charging for details).
• Disconnect the charger from the EnergyPak.
• Push the energy level check button. The LED indicator should now light up.
• The EnergyPak is now activated.
Bike usage
19
