3 Applications
This digital multimeter serves for
measuring DC and AC voltages up to
600 V and resistances. Furthermore,
it is possible to measure the forward
voltage of diodes. A buzzer is inte-
grated for checking continuity.
4 Setting the Meter into
Operation
1) For transport, the test leads are
accommodated in the housing. To
take them out, open the rear shell
of the housing (fig. 3). To obtain a
good reading position, it is pos-
sible to set up the meter. For this
purpose, the rear shell of the
housing serves as a stand.
2) Set the orange sliding switch (5)
to the position of the desired
measuring function. A reading will
appear on the display (1). If it fails
to appear, insert two 1.5 V button
cells (LR-44). If the symbol
is
Dead batteries do not
belong in the household
rubbish; always take
them to a special waste
disposal (e. g. collecting
container at your retailer).
GB
16
