47
English
7.6 Recordings
According to the factory settings, the recorder will, after it is
switched on, record all channels to which a camera is con-
nected. In addition or when the recording times have been
changed (see chapter 6.6.5), recording can be manually started.
To start recording for a specific channel
1) Use the left mouse button to click the live image to be
recorded. (In the single-image mode, simply press the left
mouse button.) The quick-selection bar will appear.
HD
Fig. 7-11
Quick-selection bar
2) Click the camera symbol
HD
. Recording will start shortly
afterwards and the colour of the symbol will change to red.
3) To stop recording, click the symbol
HD
again.
As an alternative, use the button
on the remote control to
start manual recordings, and the button
■
to stop manual
recordings. In the multi-image mode, the camera whose image
is highlighted by a blue frame will be recorded. If required,
before recording is started, use the numeric buttons to switch
to the full-screen mode.
To start recording for multiple channels
1) Use the right mouse button to show the toolbar.
2) Click the symbol
HD
SD
i
15/09/2019 14:27:38
located in the right section of the
toolbar. The window for manual recordings will appear.
3) To start a recording, click the symbol
⃠
of the respective
channels in the column “Manual Record”; to stop a re-
cording, click
✔
.
7.7 Replaying recordings
A current recording will
not
be interrupted when a recording
is being replayed.
7.7.1 Replaying the 5 minutes of a channel
most recently recorded
1) Use the left mouse button to click the live camera image
whose recording is to be replayed. The quick-selection bar
will appear (Fig. 7-11).
2) Click the symbol
HD
. The replay of the 5 minutes most
recently recorded will start and a control bar will be shown:
Fig. 7-12
Replay control bar
3) To pause and continue the replay, use the buttons
and .
4) To view single images one after the other, click the pause
symbol repeatedly.
5) For fast forward or fast reverse, keep the left mouse button
pressed and move the replay button forwards or back-
wards.
6) To stop the replay any time, click
×
.
7.7.2 Replaying specific recordings
Saving a section of a recording
on an external device
To show the replay window, press the button
on the remote
control; as an alternative, use the right button to show the
toolbar and then, in the toolbar, click the first symbol
HD
SD
i
15/09/2019 14:27:38
to
the left to call up the start menu and finally, in the start menu,
click “Search”.
24h 2h 1h 30m
CH1
Normal
IO
PIR
PID
LCD
SOD
PD
FD
CC
Sound
Occlusion
Manual
CH2
CH3
CH4
CH5
CH6
CH7
CH8
00:00
02:00
04:00
06:00
08:00
10:00
12:00
14:00
16:00
18:00
20:00
22:00
00:00
09/28/2019 07:16:48
09/28/2019 07:16:48
Channel
Stream Type
Mainstream
General
Events Sub-periods Smart Tag External File
Search
Date
09/28/2019
Normal
Motion
IO
PIR Intelligent Alarm
Manual
Pause
09/28/2019
Motion
Search Type
07:16:48
Fig. 7-13
Replay window
The following submenus are available:
General | Events | Sub-periods | Smart | Tag | External File
The name of the submenu called up is underlined and shown
in turquoise. To go to a different submenu, click the name
of the submenu. This chapter describes the functions of the
submenu “General”.
1) When the replay window appears, the current day is se-
lected as the search date (in the upper left beneath the
magnifier symbol). To search for recordings of a different
day, click the calendar symbol.
2) On the left side of the window, select the channels whose
recordings are to be replayed. As soon as a channel is se-
lected and if recordings of this channel are available, the
recordings are indicated as bar graphs in the hours overview
at the bottom of the window.
3) To replay, click the symbol (above the hours overview).
To go to a specific recording time, click, using the mouse
pointer, the corresponding time on the bar graph in the
hours overview.
4) Further functions are described in the following table:
Field /
Symbol Function
Options on the left
Date
Date of the recordings to be searched for
Search
Type
To search for specific recordings, restrict the reason why
the recordings were triggered, e. g. to:
Normal (time-controlled), IO, Manual, Motion, PIR (trig-
gered by a camera with IR motion sensor)
Stream
Type
To select “Mainstream” or “Substream”
Channel
To select the camera channels;
select at least one channel
Functions at the bottom of the window
The menu fields and control symbols will be hidden; the
view will be enlarged.
To return to the complete view, move the mouse pointer
to the lower edge of the image so that the control sym-
bols are shown again and then click the symbol again
Indication to the right,
next to the symbols
*
Fast reverse
<< X 2 … 16
*
Slow motion forward
SLOW 1/2 … 1/16
Replay at normal speed
Play
Pause
Pause
*
Next frame
Step
Stop replay
Stop
*
Fast forward
>> X 2 … 16
*Click symbol repeatedly, if required
